Cupid's Arrow Incense Holder And Tray (Magnetic & Non-Ma...

Note: Non-Magnetic Version Also Available
Note: Non-Magnetic Version Also Available

Valentine twists on my minimalist magnetic incense holder. Perfect for a little home decor.

Easily swap the incense stick and align the incense stick back with the removable magnetic incense holder.

The tray conveniently catches any ash from the incense stick making cleanup easier-no more messy floors or shelves.

Holder supports two incense positions. Choose one that the incense does not exceed the tray.

Fig: shows the lower incense stick exceeds the tray. This will cause the ash to fall outside the tray.

Prints tested with:

PLA

0.2 mm Layer height.

5% Infil (3D-Honeycome).

Variable layer height for smoother curves on both models.

Supports:

Needs support for the back part of the heart.

Support from the built plate is enough.

Magnet:

Magnet size measured:

Diameter: 5.95mm

Thickness: 2.92mm

You need 2 magnets, one for each model.

Pause the print in your preferred slicer on the first layer that starts to cover the magnet hole.

Insert the magnet and continue the print. (Careful with the orientation of both magnets)

If you are feeling romantic, you could even let your significant other insert the magnet .

Feel free to share your prints!

Happy Printing!

Technical Note:

The magnet slot is 1mm high from the floor for the holder model, and for the tray, 0.5mm from the surface.

Both magnet slot's dimensions are

Diameter: 6 +0.1mm

Thickness: 2.9 +0.1mm

Consider Supporting!!! Your support will allow me to continue sharing my design.

buymeacoffee.com/supanut.tho

Edit:

Replacing the wrong version of the Tray model. (09/02/2025)