Funny 3d Print room door sign

The «Let's Stick Together» ABS Joke Door Sign

Intro

We've all been there. You start a long ABS print, optimistic about the results, only to find a sad, warped mess on your print bed later. This sign captures that all-too-relatable 3D printing struggle with a classic, humorous quip. It's the perfect tongue-in-cheek addition to your 3D print room door or workshop wall.

The sign is designed for easy, support-free printing and should be a quick and satisfying print (unlike some ABS projects we could mention!).

Print Instructions & Model Details

Material: Print it in your favorite PLA, PETG, or even ASA (if you're feeling brave).

Layer Height: A 0.2mm layer height works great, but any standard layer height should be fine.

Supports: No supports needed! The design is optimized to print flat.

Infill: 15-20% infill is sufficient for durability.

Assembly: The model is a single piece with raised lettering. For a multi-color look as shown in the photo, you can use the MMU/AMS/CFS feature or simply perform a filament change at the appropriate layer height in your slicer.

Scaling: The model can be scaled up or down to fit your desired location or build plate size, just make sure small details (like text) remain large enough for your nozzle size.